Networking

Brand : Cisco Manufacturer part number: (SF302-08-pp) Ports : 8 ports Switch type : managed  Warranty : One year.  

Brand : Cisco Manufacturer part number: (SF200-24-EU) Ports : 24 ports Switch type : Unmanaged Gigabit Ethernet Warranty : One year.

Brand : Cisco Manufacturer part number: (SG110-24-EU) Ports : 24 ports Switch type : Unmanaged Gigabit Ethernet Warranty : One year.  

Brand : Cisco Manufacturer part number: (SG112-24-EU) Ports : 24 ports Switch type : Unmanaged Gigabit Ethernet Warranty : One year.

OS Required: Linux, Apple MacOS X, Microsoft Windows Ports: 8 x 10/100 Device Type: Switch - 8 ports - unmanaged Jumbo Frame Support: Yes Humidity Operating Range: 10-90% (non-condensing) Minimum Storage Temperature: -4 F Depth: 5.1 inches Weight: n/a Minimum Operating Temperature: 32 F Interfaces: 8 x 10Base-T/100Base-TX - RJ-45 - PoE Humidity Storage Range: 10-90% (non-condensing) Height: 1.2 in Maximum Operating Temperature: 104 F MAC Address Table Size: 1000 entries Voltage Required: DC 48 V Localization: North America Performance: Switching capacity: 1.6 Gbps; Forwarding performance (64-byte packet size): 1.2 Mpps Power Device: Power adapter - external Width: 5.1 inches Power Over Ethernet (PoE): PoE Status Indicators: Power, PoE, link/activity

Unshielded RJ45/RJ45 modular cords Frequency range 1-250 MHz Conductor 24 AWG 7x0.20 mm stranded bare copper Insulation PO Color code ANSI/TIA-568-C.2 Jacket LS0H Standard jacket color Gray  Standard boot color Black 

This page shows the standard AT&T fiber-optic pigtails made with multimode or singlemode fibers, terminated with different connectors. Additional combinations can be selected using the information on page B.3. Buffer type 900μ tight flame retardant LS0H coating Strength elements (MTRJ only) Served aramid and glass yarn Minicable jacket material (MTRJ only) Flame retardant LS0H compound

Single-Pair punch-down tool and blade Application Punch-down and cut one wire in one action Tool compatibility All AT&T CopperLine punch-down jacks Blade compatibility All AT&T CopperLine punch-down jacks Color Blue-yellow 

4-Pair MultiPunch tool and blade Application Punch-down and cut 8 wires in one action Tool compatibility All AT&T CopperLine punch-down jacks Blade compatibility All AT&T CopperLine punch-down jacks Color Yellow

This page shows the standard AT&T fiber-optic pigtails made with multimode or singlemode fibers, terminated with different connectors. Additional combinations can be selected using the information on page B.3. Buffer type 900μ tight flame retardant LS0H coating Strength elements (MTRJ only) Served aramid and glass yarn Minicable jacket material (MTRJ only) Flame retardant LS0H compound

4 & 8 pair U/UTP cables Frequency range 1-500 MHz Conductor 23 AWG Solid bare copper Insulation PO Color code ANSI/TIA-568-C.2 Shield None Jacket PVC or LS0H

Unshielded RJ45/RJ45 modular cords Frequency range 1-500 MHz Conductor 23 AWG 7x0.20 mm stranded bare copper Insulation PO Color code ANSI/TIA-568-C.2 Jacket LS0H Standard jacket color Gray  Standard boot color Black 

24 & 48 port shielded blank 19” panels KSJ type compatibility Shielded or unshielded 180° straight RJ45 jacks Category Compatibility CAT5e CAT6 CAT6A KSJ insertion method Back loading Formation 24 ports in one row Front cable organizer Removable modular rings Back cable organizer Folding frame with snap-in cable grips Shield All shielded jacks grounded through the panel

1-48 fiber 1U low-cost fixed 19" fiber optic splicing/distribution panels Connector type compatibility - Group A ST, SC, FC, LC, MTRJ, LSH (E-2000™) Splicing Up to two 24 fiber splicing cassettes Distribution Up to 48 fiber direct cable termination Panel access Top and front sliding tray Back Cable Management None Front Cable Management None

1-48 fiber 1U low-cost fixed 19" fiber optic splicing/distribution panels Connector type compatibility - Group A ST, SC, FC, LC, MTRJ, LSH (E-2000™) Splicing Up to two 24 fiber splicing cassettes Distribution Up to 48 fiber direct cable termination Panel access Top and front sliding tray Back Cable Management None Front Cable Management None

This page shows some of the available combinations of AT&T fiber-optic Duplex Singlemode Single Boot made with singlemode fibers and terminated with LC/UPC connectors. Main features: HD Push/Pull tabs, Polarity switch enabled, Color coded polarity. Additional combinations can be selected using the information on page B.3. Fiber type Select a singlemode fiber from page B.6. Buffer type None Strength elements Served aramid and glass yarn Minicable jacket material Flame retardant LS0H compound