Cables & Accessories

RACK UNITS:  1 RACK WIDTH:  19.00" WIDTH:  19.00" HEIGHT:  3.48" DEPTH:  1.21"

Premium-line 6S/FTP system patch cords are factory approved for use in data centers and large enterprises. For maximum performance, the cable has two protective layers.

This page shows some of the available combinations of AT&T fiber-optic Duplex Singlemode Single Boot made with singlemode fibers and terminated with LC/UPC connectors. Main features: HD Push/Pull tabs, Polarity switch enabled, Color coded polarity. Additional combinations can be selected using the information on page B.3. Fiber type Select a singlemode fiber from page B.6. Buffer type None Strength elements Served aramid and glass yarn Minicable jacket material Flame retardant LS0H compound

Single-Pair punch-down tool and blade Application Punch-down and cut one wire in one action Tool compatibility All AT&T CopperLine punch-down jacks Blade compatibility All AT&T CopperLine punch-down jacks Color Blue-yellow 

8P8C unshielded RJ45 punch-down keystone jacks Frequency range 1-500 MHz Compatible conductors 22-26 AWG Solid or stranded Pin-pair assignment T568A & T568B (Universal) Contacts 50μ-Inch Gold plating Shield None Housing High impact FR compound Standard color White/Blue or White.

Unshielded RJ45/RJ45 modular cords Frequency range 1-500 MHz Conductor 23 AWG 7x0.20 mm stranded bare copper Insulation PO Color code ANSI/TIA-568-C.2 Jacket LS0H Standard jacket color Gray  Standard boot color Black 

Premium-line 6S/FTP system patch cord utp cat6 1m are factory approved for use in data centers and large enterprises. For maximum performance, the cable has two protective layers.

8P8C unshielded RJ45 punch-down keystone jacks Frequency range 1-250 MHz Compatible conductors 22-26 AWG Solid or stranded Pin-pair assignment T568A & T568B (Universal) Contacts 50μ-Inch Gold plating Shield None Housing High impact FR compound Standard color White/Blue or White.

This page shows the standard AT&T fiber-optic pigtails made with multimode or singlemode fibers, terminated with different connectors. Additional combinations can be selected using the information on page B.3. Buffer type 900μ tight flame retardant LS0H coating Strength elements (MTRJ only) Served aramid and glass yarn Minicable jacket material (MTRJ only) Flame retardant LS0H compound

D-Link Patch Cord 3M Cat6 UTP Round / NCB-C6UGRYR1-3 Best twisted-pair cables for transmitting data over local area Networks (LANs). Ideal for simple, cost-effective and high-speed transmission performance. Better reliability for current applications and higher data rates for future applications.

premium Line Module cat6 for Patch Pane is Premium-Line 90° shielded Keystone Jack in fully shielded design, optimizes shield effectiveness protection from EMI. Dual IDC connector can accept 22-26 AWG solid cables, supports T568 A&B wiring, and it uses 110 or Krone tools for termination.

Unshielded RJ45/RJ45 modular cords Frequency range 1-250 MHz Conductor 24 AWG 7x0.20 mm stranded bare copper Insulation PO Color code ANSI/TIA-568-C.2 Jacket LS0H Standard jacket color Gray  Standard boot color Black 

D-Link NCB-C6UGRYR1-2 Cat6 UTP patch cord cable is rigid cables are the best twisted-pair cables on the market for local area network (LAN) data transmission. These cables exceed TIA/EIA-568B.2/TIA/EIA-568C.2 and IEC 60603-7-4 performance requirements.

D-link Cat6 UTP Keystone / NKJ-C6WH1B21 RJ45 8P 8C 180º 50u Punch Down Jack Terminating 4 pairs, 23-26 AWG Cable Universal labels color coded for T568A and T568B wiring schemes Fitting high density keystone panel IDC: suitable for 23-26 AWG stranded and solid wire, compatible with both 110 Krone punch down tools The Cat6 transmission performance is in compliance with the ANSI/TIA/EIA 568 C.2 standard

D-Link NCB-C6UGRYR1-1 Cat6 UTP Patch 1 Meter Cord Rigid cables are the best twisted-pair cables on the market for local area network (LAN) data transmission. These cables exceed TIA/EIA-568B.2/TIA/EIA-568C.2 and IEC 60603-7-4 performance requirements.

This page shows the standard AT&T fiber-optic pigtails made with multimode or singlemode fibers, terminated with different connectors. Additional combinations can be selected using the information on page B.3. Buffer type 900μ tight flame retardant LS0H coating Strength elements (MTRJ only) Served aramid and glass yarn Minicable jacket material (MTRJ only) Flame retardant LS0H compound

This page shows the standard AT&T fiber-optic pigtails made with multimode or singlemode fibers, terminated with different connectors. Additional combinations can be selected using the information on page B.3. Buffer type 900μ tight flame retardant LS0H coating Strength elements (MTRJ only) Served aramid and glass yarn Minicable jacket material (MTRJ only) Flame retardant LS0H compound

Model No: D-Link patch cord cat6 0.5m, UTP Round / NCB-C6UGRYR1-0.5, As streaming video and multimedia over LAN are gaining recognition, customers demand sooner knowledge transmission and decreased ready time. D-Hyperlink cables are perfect for easy, cost-effective and high-speed transmission efficiency. They assist a better signal-to-noise ratio, offering higher reliability for present purposes and better knowledge charges for future purposes.

Features of D-Link single electrical faceplate / NFP-0WHI11 UK Style with shutter against dust and labeling plate. I.D. Plate: Polycarbonate, UL94V-2 transparent color. Face plate: ABS, UL94-HB, with white color. Dust Cover: ABS, UL94-HB, with white color Screw: M3.5XL25.0mm Directive: RoHS certified

D-Link Flat double faceplate / NFP-0WHI22 is Dual Faceplate accepts Two keystone jack Two Cat6 Keystone Jack UTP Back Box Square

Features of D-Link face plate single Magic UK Style with shutter against dust and labeling plate. Accepts Cat5E/Cat6/Cat6A Keystone Jacks Available in Single, Dual and Quad Ports Color: White UK Style with shutter against dust and labeling plate. I.D. Plate: Polycarbonate, UL94V-2 transparent color. Face plate: ABS, UL94-HB, with white color. Dust Cover: ABS, UL94-HB, with white color Screw: M3.5XL25.0mm Directive: RoHS certified

Features of D-Link dual face plate magic / NFP-0WHI21 UK Style with shutter against dust and labeling plate. Accepts Cat5E/Cat6/Cat6A Keystone Jacks Available in Single, Dual and Quad Ports Color: White UK Style with shutter against dust and labeling plate. I.D. Plate: Polycarbonate, UL94V-2 transparent color. Face plate: ABS, UL94-HB, with white color. Dust Cover: ABS, UL94-HB, with white color Screw: M3.5XL25.0mm Directive: RoHS certified Warranty

The electrical back box is designed for mounting into a wall, floor or other flat surface. Each unit includes screws and double-sided tape for mounting, rubber-door and cable tie for cable.

- D-link Patch Cord cat6 .25 CM is Four Pairs Unshielded Twisted Pair (UTP) Cable -Conductor Metallic : Naked Copper - Colour Code: Grey -Conductor: 24 AWG -Insulation Materials : HD-PE -Jacket Materials : PVC UL94V-0 - Warmth -resistant: 60oC minimal (Temperature restricted ) -Flame property: The aim of the vertical flame check is to display screen out flammable wires. It follows the VW-1 (UL); FT-1 (CSA) requirements . MODULAR CONNECTOR/PLUG -RJ-45 8P for Transparence colour . -Gold plated: 30U” -Contact blade: Phosphor Bronze -Temperature range : -10 ~ 80o C -Dielectric withstanding voltage: 500V AC -Insulation resistance: 35M Ohm (max.) - Sturdiness : 750 matching cycles -Cable-to-plug tensile power : 20lbs (89N) (min.) -UL purposes : 250V AC, 2A (max.) -Polycarbonate (PC) UL94-V-0

PremiumLine double face platemagic In wall

Premium line double fceplate Magic In Wall