Cables & Accessories

D-Link Patch Cord 3M Cat6 UTP Round / NCB-C6UGRYR1-3 Best twisted-pair cables for transmitting data over local area Networks (LANs). Ideal for simple, cost-effective and high-speed transmission performance. Better reliability for current applications and higher data rates for future applications.

This page shows the standard AT&T fiber-optic pigtails made with multimode or singlemode fibers, terminated with different connectors. Additional combinations can be selected using the information on page B.3. Buffer type 900μ tight flame retardant LS0H coating Strength elements (MTRJ only) Served aramid and glass yarn Minicable jacket material (MTRJ only) Flame retardant LS0H compound

8P8C unshielded RJ45 punch-down keystone jacks Frequency range 1-250 MHz Compatible conductors 22-26 AWG Solid or stranded Pin-pair assignment T568A & T568B (Universal) Contacts 50μ-Inch Gold plating Shield None Housing High impact FR compound Standard color White/Blue or White.

Premium-line 6S/FTP system patch cord utp cat6 1m are factory approved for use in data centers and large enterprises. For maximum performance, the cable has two protective layers.

8P8C unshielded RJ45 punch-down keystone jacks Frequency range 1-500 MHz Compatible conductors 22-26 AWG Solid or stranded Pin-pair assignment T568A & T568B (Universal) Contacts 50μ-Inch Gold plating Shield None Housing High impact FR compound Standard color White/Blue or White.

Unshielded RJ45/RJ45 modular cords Frequency range 1-500 MHz Conductor 23 AWG 7x0.20 mm stranded bare copper Insulation PO Color code ANSI/TIA-568-C.2 Jacket LS0H Standard jacket color Gray  Standard boot color Black 

Single-Pair punch-down tool and blade Application Punch-down and cut one wire in one action Tool compatibility All AT&T CopperLine punch-down jacks Blade compatibility All AT&T CopperLine punch-down jacks Color Blue-yellow 

This page shows some of the available combinations of AT&T fiber-optic Duplex Singlemode Single Boot made with singlemode fibers and terminated with LC/UPC connectors. Main features: HD Push/Pull tabs, Polarity switch enabled, Color coded polarity. Additional combinations can be selected using the information on page B.3. Fiber type Select a singlemode fiber from page B.6. Buffer type None Strength elements Served aramid and glass yarn Minicable jacket material Flame retardant LS0H compound

Premium-line 6S/FTP system patch cords are factory approved for use in data centers and large enterprises. For maximum performance, the cable has two protective layers.

RACK UNITS:  1 RACK WIDTH:  19.00" WIDTH:  19.00" HEIGHT:  3.48" DEPTH:  1.21"

RACK UNITS:  1 RACK WIDTH:  19.00" WIDTH:  19.00" HEIGHT:  3.48" DEPTH:  1.21"

Insulation Material: HD-PE Heat-resistant: 75º C minimum RJ-45 8P for Transparence color Gold plated: 30U” Contact blade: Phosphor Bronze Temperature range: -20 ~ 80oC Dielectric withstanding voltage: 500V AC Insulation resistance: 35M Ohm (max.) Durability: 750 matching cycles Cable-to-plug tensile strength: 20lbs (89N) (min.

Insulation Material: HD-PE Heat-resistant: 75º C minimum RJ-45 8P for Transparence color Gold plated: 30U” Contact blade: Phosphor Bronze Temperature range: -20 ~ 80oC Dielectric withstanding voltage: 500V AC Insulation resistance: 35M Ohm (max.) Durability: 750 matching cycles Cable-to-plug tensile strength: 20lbs (89N) (min.)

Designed for 180 degree premium line anti-keystone heads.A number is pre-printed on each port for easy identification.

1-48 fiber 1U low-cost fixed 19" fiber optic splicing/distribution panels Connector type compatibility - Group A ST, SC, FC, LC, MTRJ, LSH (E-2000™) Splicing Up to two 24 fiber splicing cassettes Distribution Up to 48 fiber direct cable termination Panel access Top and front sliding tray Back Cable Management None Front Cable Management None

24 & 48 port shielded blank 19” panels KSJ type compatibility Shielded or unshielded 180° straight RJ45 jacks Category Compatibility CAT5e CAT6 CAT6A KSJ insertion method Back loading Formation 24 ports in one row Front cable organizer Removable modular rings Back cable organizer Folding frame with snap-in cable grips Shield All shielded jacks grounded through the panel

Design of intelligent circuit & line scanning Professional and exquisite appearance Pragmatic lighting flashlight Convenient sensitivity & volume adjustion function

24 & 48 port shielded blank 19” panels KSJ type compatibility Shielded or unshielded 180° straight RJ45 jacks Category Compatibility CAT5e CAT6 CAT6A KSJ insertion method Back loading Formation 24 ports in one row Front cable organizer Removable modular rings Back cable organizer Folding frame with snap-in cable grips Shield All shielded jacks grounded through the panel

4-Pair MultiPunch tool and blade Application Punch-down and cut 8 wires in one action Tool compatibility All AT&T CopperLine punch-down jacks Blade compatibility All AT&T CopperLine punch-down jacks Color Yellow

1.25Gbps Gigabit Industrial Ethernet SFP (Small Form Factor Plug Tranceiver) with SFF-8472 DMI Features: - Data Rate 1.25Gbps - Single +3.3V power supply - RoHS compliance - Low power dissipation - Class I laser product - Low EMI and excellent ESD protection - Industrial temperature (-40 to 85 ºC) - SFF-8472 Digital Diagnostic Management Interface compliant

Panel: SECC, 1.2mm thickness with optional color paintedIdentification: ID plate: PVC, Transparent color with paper ID Bracket: ABS+PC, UL 94V-0 RJ45 Jack: Housing: PBT+ Glass Fiber, UL94V-0 Contact Bracket: PBT+ Glass Fiber, UL94V-0 RJ45 Jack Contact: Material: Phosphor Bronze with Nickel plated Finish: 50 micro-inches Gold plated on plug contact area RJ45 Jack Shield: Bronze with Nickel plated Dust ...

Cabling Type Ethernet 1000Base-LX Max Transfer Distance 6.2 miles Type SFP (mini-GBIC) transceiver module Connectivity Technology wired Optical Wave Length 1310 nm Data Link Protocol Gigabit Ethernet Data Transfer Rate 1 Gbps

1-48 fiber 1U low-cost fixed 19" fiber optic splicing/distribution panels Connector type compatibility - Group A ST, SC, FC, LC, MTRJ, LSH (E-2000™) Splicing Up to two 24 fiber splicing cassettes Distribution Up to 48 fiber direct cable termination Panel access Top and front sliding tray Back Cable Management None Front Cable Management None

4 & 8 pair U/UTP cables Frequency range 1-500 MHz Conductor 23 AWG Solid bare copper Insulation PO Color code ANSI/TIA-568-C.2 Shield None Jacket PVC or LS0H

Model No: D-LINK, Cat6, 24 AWG UTP, Cable Rolls, 305M, NCB-C6UGRYR-305-24, As streaming video and multimedia over LAN are gaining reputation, customers demand quicker knowledge transmission and diminished ready time. D-Hyperlink cables are perfect for easy, cost-effective and high-speed transmission efficiency. They help a better signal-to-noise ratio, offering higher reliability for present purposes and better knowledge charges for future purposes.

The HP J9150A compatible 10 Gigabit 10Base-SR (LC connector) SFP+ module allows you to upgrade specific switches for faster network operations. This 10Base-SR SFP+ Module is compatible with all HP products that support the J9150A SFP+ transceiver.

4 & 8 pair U/UTP cables Frequency range 1-250 MHz Conductor 24 AWG Solid bare copper Insulation PO Color code ANSI/TIA-568-C.2 Shield None Jacket PVC or LS0H