Cables & Accessories

Premium-Line conduits are standard 19-inch racks and lockable cabinets. Effectively prevents cable entanglement and protects the cable within the permissible bend radius. The lightweight design is convenient for future installation and management.

Premium Line 121122210 face plate dull 8*8 secures to any surface, drywall, baseboard, and even modular furniture, 100% compatible with standard wall (face) plates, Keystone jacks can be snapped in and out easily.

Premium-Line Class 6 unshielded patch panels are available for ANSI / TIA-568.2-D, ISO / IEC 11801-1, and Specifications EN50173-1, Class E. Devices are typically compliant with the EUROHS Directive.

The Premium-Line Class 6 U / UTP System Patch Code is designed for use in advanced projects.

The Premium-Line Class 6 U / UTP System Patch Code is designed for use in advanced projects.

Premium Line 206141115 Cat6 U/UTP 305m

Premium Line 106111010 Unshielded keystone jack Module Cat6  with good and stable performance, this device has achieved good sales performance in the market.

Premium Line 186110305 SlimLine Patch Cord 3M Cat6 U/UTP, Premium Line Category 6 U/UTP System Patch Cord is designed for the high level project use.

Premium Line 121221210 Single face plate electrical 8*8 secures to any surface, drywall, baseboard, and even modular furniture, 100% compatible with standard wall (face) plates, Keystone jacks can be snapped in and out easily.

premium Line Module cat6 for Patch Pane is Premium-Line 90° shielded Keystone Jack in fully shielded design, optimizes shield effectiveness protection from EMI. Dual IDC connector can accept 22-26 AWG solid cables, supports T568 A&B wiring, and it uses 110 or Krone tools for termination.

Features of Premium Line Double faceplate: Secures to any surface, drywall, baseboard, and even modular furniture 100% compatible with standard wall (face) plates Keystone jacks can be snapped in and out easily Comes in models to accommodate 1/2/3/4 inserts and shuttered dust cover Comes with hidden mounting screws and clear outlet ID labels

Premium-line 6S/FTP system patch cords are factory approved for use in data centers and large enterprises. For maximum performance, the cable has two protective layers.

Designed for 180 degree premium line anti-keystone heads.A number is pre-printed on each port for easy identification.

The electrical back box is designed for mounting into a wall, floor or other flat surface. Each unit includes screws and double-sided tape for mounting, rubber-door and cable tie for cable.

Premium-line 6S/FTP system patch cord utp cat6 1m are factory approved for use in data centers and large enterprises. For maximum performance, the cable has two protective layers.

- D-link Patch Cord cat6 .25 CM is Four Pairs Unshielded Twisted Pair (UTP) Cable -Conductor Metallic : Naked Copper - Colour Code: Grey -Conductor: 24 AWG -Insulation Materials : HD-PE -Jacket Materials : PVC UL94V-0 - Warmth -resistant: 60oC minimal (Temperature restricted ) -Flame property: The aim of the vertical flame check is to display screen out flammable wires. It follows the VW-1 (UL); FT-1 (CSA) requirements . MODULAR CONNECTOR/PLUG -RJ-45 8P for Transparence colour . -Gold plated: 30U” -Contact blade: Phosphor Bronze -Temperature range : -10 ~ 80o C -Dielectric withstanding voltage: 500V AC -Insulation resistance: 35M Ohm (max.) - Sturdiness : 750 matching cycles -Cable-to-plug tensile power : 20lbs (89N) (min.) -UL purposes : 250V AC, 2A (max.) -Polycarbonate (PC) UL94-V-0

Features of D-Link face plate single Magic UK Style with shutter against dust and labeling plate. Accepts Cat5E/Cat6/Cat6A Keystone Jacks Available in Single, Dual and Quad Ports Color: White UK Style with shutter against dust and labeling plate. I.D. Plate: Polycarbonate, UL94V-2 transparent color. Face plate: ABS, UL94-HB, with white color. Dust Cover: ABS, UL94-HB, with white color Screw: M3.5XL25.0mm Directive: RoHS certified

Features of D-Link dual face plate magic / NFP-0WHI21 UK Style with shutter against dust and labeling plate. Accepts Cat5E/Cat6/Cat6A Keystone Jacks Available in Single, Dual and Quad Ports Color: White UK Style with shutter against dust and labeling plate. I.D. Plate: Polycarbonate, UL94V-2 transparent color. Face plate: ABS, UL94-HB, with white color. Dust Cover: ABS, UL94-HB, with white color Screw: M3.5XL25.0mm Directive: RoHS certified Warranty

D-Link NCB-C6UGRYR1-2 Cat6 UTP patch cord cable is rigid cables are the best twisted-pair cables on the market for local area network (LAN) data transmission. These cables exceed TIA/EIA-568B.2/TIA/EIA-568C.2 and IEC 60603-7-4 performance requirements.

Insulation Material: HD-PE Heat-resistant: 75º C minimum RJ-45 8P for Transparence color Gold plated: 30U” Contact blade: Phosphor Bronze Temperature range: -20 ~ 80oC Dielectric withstanding voltage: 500V AC Insulation resistance: 35M Ohm (max.) Durability: 750 matching cycles Cable-to-plug tensile strength: 20lbs (89N) (min.)

Insulation Material: HD-PE Heat-resistant: 75º C minimum RJ-45 8P for Transparence color Gold plated: 30U” Contact blade: Phosphor Bronze Temperature range: -20 ~ 80oC Dielectric withstanding voltage: 500V AC Insulation resistance: 35M Ohm (max.) Durability: 750 matching cycles Cable-to-plug tensile strength: 20lbs (89N) (min.

Model No: D-Link patch cord cat6 0.5m, UTP Round / NCB-C6UGRYR1-0.5, As streaming video and multimedia over LAN are gaining recognition, customers demand sooner knowledge transmission and decreased ready time. D-Hyperlink cables are perfect for easy, cost-effective and high-speed transmission efficiency. They assist a better signal-to-noise ratio, offering higher reliability for present purposes and better knowledge charges for future purposes.

D-Link Patch Cord 3M Cat6 UTP Round / NCB-C6UGRYR1-3 Best twisted-pair cables for transmitting data over local area Networks (LANs). Ideal for simple, cost-effective and high-speed transmission performance. Better reliability for current applications and higher data rates for future applications.

Features of D-Link single electrical faceplate / NFP-0WHI11 UK Style with shutter against dust and labeling plate. I.D. Plate: Polycarbonate, UL94V-2 transparent color. Face plate: ABS, UL94-HB, with white color. Dust Cover: ABS, UL94-HB, with white color Screw: M3.5XL25.0mm Directive: RoHS certified

D-Link Flat double faceplate / NFP-0WHI22 is Dual Faceplate accepts Two keystone jack Two Cat6 Keystone Jack UTP Back Box Square

D-link Cat6 UTP Keystone / NKJ-C6WH1B21 RJ45 8P 8C 180º 50u Punch Down Jack Terminating 4 pairs, 23-26 AWG Cable Universal labels color coded for T568A and T568B wiring schemes Fitting high density keystone panel IDC: suitable for 23-26 AWG stranded and solid wire, compatible with both 110 Krone punch down tools The Cat6 transmission performance is in compliance with the ANSI/TIA/EIA 568 C.2 standard

PremiumLine double face platemagic In wall

D-Link NCB-C6UGRYR1-1 Cat6 UTP Patch 1 Meter Cord Rigid cables are the best twisted-pair cables on the market for local area network (LAN) data transmission. These cables exceed TIA/EIA-568B.2/TIA/EIA-568C.2 and IEC 60603-7-4 performance requirements.

Premium line double fceplate Magic In Wall

- Provide 8 Gigabit RJ-45 Copper Ports & 2 Combo Ports (RJ-45/SFP 100FX or 1000BaseF(SX/LX/LH)) - Compatible with IEEE 802.3af/at PoE+ - Support PoE Scheduling and Remote PoE Control - Loop Protection - Network Redundancy LACP, STP/RSTP, CTS Fast Ring - Port Based and Tag Based VLAN, IEEE 802.1ad QinQ VLAN - PoE Setting - Auto / Force Power - Support 9K Jumbo Frames - 6KV Surge Immunity on RJ-45 Copper Ports (K.21*) - Dual Power Input (48~55VDC)  - Reverse Polarity Protection - Aluminum Housing - Operating Temperature -40ºC~75ºC

1.25Gbps Gigabit Industrial Ethernet SFP (Small Form Factor Plug Tranceiver) with SFF-8472 DMI Features: - Data Rate 1.25Gbps - Single +3.3V power supply - RoHS compliance - Low power dissipation - Class I laser product - Low EMI and excellent ESD protection - Industrial temperature (-40 to 85 ºC) - SFF-8472 Digital Diagnostic Management Interface compliant

The HP J9150A compatible 10 Gigabit 10Base-SR (LC connector) SFP+ module allows you to upgrade specific switches for faster network operations. This 10Base-SR SFP+ Module is compatible with all HP products that support the J9150A SFP+ transceiver.