Cables & Accessories

This page shows the standard AT&T fiber-optic pigtails made with multimode or singlemode fibers, terminated with different connectors. Additional combinations can be selected using the information on page B.3. Buffer type 900μ tight flame retardant LS0H coating Strength elements (MTRJ only) Served aramid and glass yarn Minicable jacket material (MTRJ only) Flame retardant LS0H compound

D-Link NCB-C6UGRYR1-1 Cat6 UTP Patch 1 Meter Cord Rigid cables are the best twisted-pair cables on the market for local area network (LAN) data transmission. These cables exceed TIA/EIA-568B.2/TIA/EIA-568C.2 and IEC 60603-7-4 performance requirements.

Built in the factory to provide the quality needed to support the requirements of the channel. It is fully loaded and clip-protected for easy removal.

D-link Cat6 UTP Keystone / NKJ-C6WH1B21 RJ45 8P 8C 180º 50u Punch Down Jack Terminating 4 pairs, 23-26 AWG Cable Universal labels color coded for T568A and T568B wiring schemes Fitting high density keystone panel IDC: suitable for 23-26 AWG stranded and solid wire, compatible with both 110 Krone punch down tools The Cat6 transmission performance is in compliance with the ANSI/TIA/EIA 568 C.2 standard

D-Link NCB-C6UGRYR1-2 Cat6 UTP patch cord cable is rigid cables are the best twisted-pair cables on the market for local area network (LAN) data transmission. These cables exceed TIA/EIA-568B.2/TIA/EIA-568C.2 and IEC 60603-7-4 performance requirements.

Unshielded RJ45/RJ45 modular cords Frequency range 1-250 MHz Conductor 24 AWG 7x0.20 mm stranded bare copper Insulation PO Color code ANSI/TIA-568-C.2 Jacket LS0H Standard jacket color Gray  Standard boot color Black 

premium Line Module cat6 for Patch Pane is Premium-Line 90° shielded Keystone Jack in fully shielded design, optimizes shield effectiveness protection from EMI. Dual IDC connector can accept 22-26 AWG solid cables, supports T568 A&B wiring, and it uses 110 or Krone tools for termination.

D-Link Patch Cord 3M Cat6 UTP Round / NCB-C6UGRYR1-3 Best twisted-pair cables for transmitting data over local area Networks (LANs). Ideal for simple, cost-effective and high-speed transmission performance. Better reliability for current applications and higher data rates for future applications.

This page shows the standard AT&T fiber-optic pigtails made with multimode or singlemode fibers, terminated with different connectors. Additional combinations can be selected using the information on page B.3. Buffer type 900μ tight flame retardant LS0H coating Strength elements (MTRJ only) Served aramid and glass yarn Minicable jacket material (MTRJ only) Flame retardant LS0H compound

LS Simple LS-PC-UC6-GY-030 Cat.6 Patch Cord 3M  built in the factory to provide the quality needed to support the requirements of the channel. It is fully loaded and clip-protected for easy removal.

LS Simple LS-MJ-UC6-WH-ERI Unshielded ERI slim cat6 utp keystone jack  is unshielded modular socket LS SimpleTM, The standard configuration includes user instructions and schematics., Slim 180 degree modular socket

8P8C unshielded RJ45 punch-down keystone jacks Frequency range 1-250 MHz Compatible conductors 22-26 AWG Solid or stranded Pin-pair assignment T568A & T568B (Universal) Contacts 50μ-Inch Gold plating Shield None Housing High impact FR compound Standard color White/Blue or White.

Premium-line 6S/FTP system patch cord utp cat6 1m are factory approved for use in data centers and large enterprises. For maximum performance, the cable has two protective layers.

Schneider DC6KYSTUWT Cat6 UTP Keystone Modular Jack  connector type RJ45 type of footprint Keystone insulation resistance >= 500 mOhm at 500 V DC minimum number of matings 750 cycles

8P8C unshielded RJ45 punch-down keystone jacks Frequency range 1-500 MHz Compatible conductors 22-26 AWG Solid or stranded Pin-pair assignment T568A & T568B (Universal) Contacts 50μ-Inch Gold plating Shield None Housing High impact FR compound Standard color White/Blue or White.

Unshielded RJ45/RJ45 modular cords Frequency range 1-500 MHz Conductor 23 AWG 7x0.20 mm stranded bare copper Insulation PO Color code ANSI/TIA-568-C.2 Jacket LS0H Standard jacket color Gray  Standard boot color Black 

Schneider ACTPC6UBCM30GY Schneider ACTPC6UBCM30GY Actassi CL-MNC patch cord 3M Main: range Actassi product Patch cord colour Grey cable shielding type UTP Complementary: type of cable 4 pair cables rated voltage 150 V AC [In] rated...

Single-Pair punch-down tool and blade Application Punch-down and cut one wire in one action Tool compatibility All AT&T CopperLine punch-down jacks Blade compatibility All AT&T CopperLine punch-down jacks Color Blue-yellow 

This page shows some of the available combinations of AT&T fiber-optic Duplex Singlemode Single Boot made with singlemode fibers and terminated with LC/UPC connectors. Main features: HD Push/Pull tabs, Polarity switch enabled, Color coded polarity. Additional combinations can be selected using the information on page B.3. Fiber type Select a singlemode fiber from page B.6. Buffer type None Strength elements Served aramid and glass yarn Minicable jacket material Flame retardant LS0H compound

Premium-line 6S/FTP system patch cords are factory approved for use in data centers and large enterprises. For maximum performance, the cable has two protective layers.

RACK UNITS:  1 RACK WIDTH:  19.00" WIDTH:  19.00" HEIGHT:  3.48" DEPTH:  1.21"

RACK UNITS:  1 RACK WIDTH:  19.00" WIDTH:  19.00" HEIGHT:  3.48" DEPTH:  1.21"

Insulation Material: HD-PE Heat-resistant: 75º C minimum RJ-45 8P for Transparence color Gold plated: 30U” Contact blade: Phosphor Bronze Temperature range: -20 ~ 80oC Dielectric withstanding voltage: 500V AC Insulation resistance: 35M Ohm (max.) Durability: 750 matching cycles Cable-to-plug tensile strength: 20lbs (89N) (min.

Insulation Material: HD-PE Heat-resistant: 75º C minimum RJ-45 8P for Transparence color Gold plated: 30U” Contact blade: Phosphor Bronze Temperature range: -20 ~ 80oC Dielectric withstanding voltage: 500V AC Insulation resistance: 35M Ohm (max.) Durability: 750 matching cycles Cable-to-plug tensile strength: 20lbs (89N) (min.)

Cisco, AE010-R, Antena Extension Base, 4G, The Cisco 4G-AE010-R single-port antenna base is designed for use with portable antennas operating at frequencies up to 6 GHz that connect to 4G wireless enhanced high-speed WAN interface cards (EHWICs) using a threaded Neill-Concelman (TNC) male connector. This antenna base unit, ordered separately, has 10 feet of plenum LMR-195 cable.

For Category 5e~6A Unshielded and Shielded Modular Jack series, and fiber bezel etc.

The all-metal, shielded Mini-Com Patch Panel accepts up to 24 shielded Mini-Com connectors in one RU. The plate has a flat stainless steel construction that attaches to 19" and 23" shelves and cabinets.

Designed for 180 degree premium line anti-keystone heads.A number is pre-printed on each port for easy identification.

1-48 fiber 1U low-cost fixed 19" fiber optic splicing/distribution panels Connector type compatibility - Group A ST, SC, FC, LC, MTRJ, LSH (E-2000™) Splicing Up to two 24 fiber splicing cassettes Distribution Up to 48 fiber direct cable termination Panel access Top and front sliding tray Back Cable Management None Front Cable Management None