APC SRTG 20KXLI

20kVA/20kW Rack/Tower 230V/380V Smart Online UPS

The APC SRTG 20KXLI is a smart online UPS that provides high-density, double-conversion power protection for rack or tower setups. It offers a power capacity of 20kVA/20kW and operates at 230V/380V. This UPS is designed to deliver uninterrupted power and features a scalable runtime for extended backup capabilities. It also comes with a Smart UPS signaling RS-232 cable for easy connectivity and control.

Specifications:

The APC SRTG 20KXLI is an advanced Smart Online UPS with a power capacity of 20kVA/20kW, specifically engineered for installation in either rack or tower configurations. It offers robust power protection and backup solutions for essential equipment. The UPS is highly versatile, accommodating a wide range of input and output voltage requirements, ensuring compatibility with diverse electrical setups. Its compact 7U form factor allows for efficient space utilization. Equipped with a reliable lead-acid battery, it guarantees uninterrupted power supply during outages. Furthermore, the UPS includes a Smart UPS signaling RS-232 cable, simplifying the process of monitoring and managing the system.

The APC SRTG 20KXLI is a sturdy and space-efficient UPS, characterized by its sleek black design. It has compact dimensions, measuring 30.6 cm in height, 440 mm in width, and 70.0 cm in depth, which makes it well-suited for easy rack-mounted installation. Weighing in at 142.5 kg, it is designed to provide stability and durability. While it does not offer USB compatibility, it remains a dependable power solution for safeguarding essential equipment.

The APC SRTG 20KXLI UPS is designed with a single input connector that supports a network frequency range of 40 to 70 Hz. It can accept input voltages ranging from 160 to 285 V and 380 to 415 V. The maximum input current is 87 A, with a switching current capacity of 125 A. The input harmonic distortion remains below 5% even at full load, and the load power factor ranges from 0.9 leading to 1 lagging.

For the output, this APC UPS offers a maximum configurable power of 20,000 W, measured in both VA and W. It delivers a sine wave output with a synchronized frequency of 50/60 Hz (+/- 0.1 Hz) to match the mains supply. Operating in double conversion online mode, it has a crest factor of 3:1. The UPS is capable of handling overload operations for 60 seconds at 125% of the rated power and for 30 seconds at 150% of the rated power. It also includes a built-in static bypass for added reliability.

In terms of efficiency, the APC UPS achieves an impressive 93% during battery operation. It offers a full load runtime of approximately 3 minutes and 30 seconds when consuming 20,000 W, and a half load runtime of around 9 minutes and 30 seconds when utilizing 10,000 W. The harmonic distortion of the output remains below 5%.

The APC SRTG 20KXLI UPS is certified with CB certification and adheres to the standards set by EN/IEC 62040-2. It is designed to operate within ambient temperatures ranging from 0 to 40 °C, with a relative humidity of 0 to 95%. The UPS is suitable for use at altitudes of up to 3000 m and has a storage temperature range of -15 to 45 °C. It has an IP20 degree of protection, ensuring adequate safety. The UPS emits an acoustic level of 58 dBA and dissipates heat at a rate of 3821 Btu/h. The battery recharge time is approximately 4 hours. The UPS comes equipped with a preinstalled network management card and features a convenient multifunction LCD control panel. It provides surge protection and noise suppression capabilities, along with various battery options to extend the runtime as needed.