Cisco Switch AC1200 Dual-Band WiFi PoE, Three Pack (1200Mbps AC) / WAP150
Cisco Switch AC1200 Dual-Band WiFi PoE, Three Pack (1200Mbps AC) / WAP150
Key Features
- The concurrent dual-band radio supports up to 1.2 Gbps for increase capacity and coverage.
- Single Point Setup, a controller-less technology, simplifies the deployment and management.
- The Gigabit Ethernet LAN interface can enable a high-speed uplink to the wired network.
- Robust security, WPA2, 802.1X with RADIUS secure authentication, and rogue AP detection
- A captive portal support supports highly secure, customised guest access with multiple rights and roles
- Simple installation and an intuitive web-based configuration and wizard can enable fast, simple deployment.
- Support for PoE powered device (PD) can enable easy installation without expensive additional wiring
- Intelligent QoS prioritises network traffic to help keep critical network applications running.
- Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet
network - Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades
- Versatile mounting can enable installation on a ceiling, wall, or desktop
- Limited lifetime hardware warranty provides peace of mind
Specifications
Standards
- IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Cabling type
- Category 5e or better
Antennas
- Internal antennas optimised for desktop installation with vertical orientation
LED indicators
- Power, WLAN, LAN
Operating system
- Linux
Physical Interfaces
Ports
- 10/100/1000 Ethernet, with support for 802.3af /at PoE, power port for AC adapter (included)
Power Supply
- External 12V 1.5A DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af/at PoE
Buttons
- Reset button, Power (on/off), Push button
Lock slot
- Slot for Kensington lock
LEDs
- Power, Wireless, Ethernet
Physical dimensions (W x D x H)
- 5.31 x 5.31x 1.5 in. (135 x 135 x 38 mm)
Weight
- 0.77lb or 350g
VLAN support
- Yes
Number of VLANs
- 1 management VLAN plus 8 VLANs for SSIDs
802.1X supplicant
- Yes
SSID-to-VLAN mapping
- Yes
Auto channel selection
- Yes
Spanning tree
- Yes
Load balancing
- Yes
IPv6
- Yes
- IPv6 host support
- IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.
Layer 2
- 802.1Q-based VLANS, 8 active VLANS plus 1 management VLAN
WPA and WPA2
- Yes, including Enterprise authentication
Access control
- Yes, management access control list (ACL) plus MAC ACL
Secure management
- HTTPS
SSID broadcast
- Yes
Rogue-access-point detection
- Yes
Mounting options
- Desktop or wall
Physical security lock
- Kensington lock slot
Quality of service (QoS)
- Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS
Wireless throughput
- Up to 1.2 Gbps data rate (real-world throughput will vary)
Recommended user support
- Up to 64 connective users, 10 active users per radio
Web user interface
- Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
Management protocols
- Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Remote management
- Yes
Event logging
- Local, remote syslog, email alerts
Network diagnostics
- Logging and packet capture
Web firmware upgrade
- Firmware upgradable through web browser, imported/exported configuration file
Dynamic Host Configuration Protocol (DHCP)
- DHCP client
IPv6 host
- Yes
HTTP redirect
- No
Frequency
- Dual concurrent radios (2.4 and 5 GHz)
Radio and modulation type
- Dual radio, orthogonal frequency division multiplexing (OFDM)
Wireless isolation
- Wireless isolation between clients
External antennas
- None
Internal antennas
- Internal Fixed PiFA Antenna
Antenna gain in dBi
- Maximum antenna gain of 3.61 dBi on 2.4 GHz
- Maximum antenna gain of 3.85 dBi on 5 GHz
Wireless distribution system (WDS)
- Yes
802.11i
- Yes
Multiple SSIDs
- 8
Wireless VLAN map
- Yes
WLAN security
- Yes
Wi-Fi Multimedia (WMM)
- Yes, with unscheduled automatic power save
Access point
- Access Point mode, WDS Bridging, Workgroup Bridge mode
Multiple-Access Point Management
- Single Point Setup Yes
- Number of access points per cluster 4
- Active clients per cluster 120
Power options
- IEEE 802.3af Ethernet switch
- Cisco Power Injector - SB-PWR-INJ2-xx
- AC Adapter - included 12v1.5A
- PoE Peak power: 9.8W
Compliance
- Safety:
- UL 60950-1
- CAN/CSA-C22.2 No. 60950-1
- IEC 60950-1
- EN 60950-1
- Radio approvals:
- FCC Part 15.247, 15.407
- RSS-210 (Canada)
- EN 300.328, EN 301.893 (Europe)
- AS/NZS 4268.2003 (Australia and New Zealand)
- EMI and susceptibility (Class B):
- FCC Part 15.107 and 15.109
- ICES-003 (Canada)
- EN 301.489-1 and -17 (Europe)
Operating temperature
- 0° to 40°C (32° to 104°F)
Storage temperature
- -20° to 70°C (-4° to 158°F)
Operating humidity
- 10% to 85% noncondensing
Storage humidity
- 5% to 90% noncondensing
System memory
- 256-MB RAM
- 128-MB Flash
Package Contents
- Cisco WAP150 WiFi Access Point
- AC Power Adapter x1
- User guide on CD-ROM x1
- Quick-start guide x1
- Ethernet network cable x1
Minimum Requirements
- Switch or router with PoE support, PoE injector, or AC Power Adapter
- Web-based configuration: Java-enabled web browser
Warranty
- Limited lifetime
No reviews found