QNAP TS-463XU-RP-4G+ Rail kit [CLONE]
الرجاء تسجيل الدخول حتى نتمكن من إخطارك بالرد
الماركة
كيو ان ايه بي
CPU
Intel® Celeron® N5095 4-core/4-thread processor, burst up to 2.9 GHz
CPU Architecture
64-bit x86
System Memory
4 GB SODIMM DDR4 (1 x 4 GB)
Maximum Memory
16 GB (2 x 8GB)
Memory Slot
2 x SODIMM DDR4 For dual-DIMM configuration, you must use a pair of identical DDR4 modules.
Flash Memory
4GB (Dual boot OS protection)
Drive Compatibility
3.5-inch SATA hard disk drives, 2.5-inch SATA hard disk drives, 2.5-inch SATA solid state drives
Gigabit Ethernet Port (RJ45)
2 (2.5G/1G/100M/10M)
HDMI
1xHDMI 2.1
USB 3.2 Gen 1 port
USB 3.2 Gen 2 (10Gbps)
LED Indicators
Power/Status, LAN, USB, HDD1-4
Buttons
Power, USB copy, Reset
Fan
1 x 120mm, 12VDC
Power Consumption: Operating Mode, Typical
40.536 W
Power Consumption: HDD Sleep Mode
21.618 W
Dimensions (HxWxD)
168 × 170 × 226 mm
Weight (Gross)
3.6 kg
| CPU | AMD G-Series GX-420MC quad-core 2.0 GHz processor |
| CPU Architecture | 64-bit x86 |
| Floating Point Unit | |
| Encryption Engine | (AES-NI) |
| System Memory | 4 GB SO-DIMM DDR3L (1 x 4 GB) |
| Maximum Memory | 16 GB (2 x 8 GB) |
| Memory Slot | 2 x SO-DIMM DDR3L For dual-DIMM configuration, you must use a pair of identical DDR3L modules. |
| Flash Memory | 512MB (Dual boot OS protection) |
| Drive Bay | 4 x 3.5-inch SATA 6Gb/s, 3Gb/s The system is shipped without HDD. For the HDD compatibility list, please visit https://www.qnap.com/compatibility/ |
| Drive Compatibility | 3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives |
| Hot-swappable | |
| M.2 SSD Slot | Optional via a PCIe adapter |
| SSD Cache Acceleration Support | |
| Gigabit Ethernet Port (RJ45) | 4 Expandable with an optional PCIe adapter |
| 10 Gigabit Ethernet Port | 1 x 10GBASE-T (10G/5G/2.5G/1G/100M) Pre-installed QXG-10G1T PCIe adapter |
| Wake on LAN (WOL) | |
| Jumbo Frame | |
| PCIe Slot | 1 Slot 1: PCIe Gen 2 x4 Pre-installed QXG-10G1T PCIe adapter |
| USB 2.0 port | 3 |
| USB 3.2 Gen 1 port | 2 |
| USB 3.2 Gen 2 (10Gbps) Port | Optional via a PCIe expansion adapter |
| Form Factor | 1U Rackmount |
| LED Indicators | HDD 1-4, Status, USB, LAN |
| Buttons | Power, Reset, USB Auto Copy |
| Dimensions (HxWxD) | 44 × 439 × 499 mm |
| Weight (Net) | 7.58 kg |
| Weight (Gross) | 9.54 kg |
| Operating temperature | 0 - 40 °C (32°F - 104°F) |
| Relative Humidity | 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
| Power Supply Unit | 250W, Input: 110-240 Vac~, 50-60Hz, 5A |
| Power Consumption: HDD Sleep Mode | 34.06 W |
| Power Consumption: Operating Mode, Typical | 50.46 W |
| Sound Level | 36.5 db(A) |
| System Warning | Buzzer |
| Max. Number of Concurrent Connections (CIFS) | 800 |
لم يتم العثور على أي تقييمات