Tenda

TEG1118P-16-250W

Tenda TEG1118P-16-250W 16-Port PoE 16GE+2SFP Ethernet Switch

Dedicated For SMB Networking & Surveillance:

Lightning protection 6 kV
Full Gigabit ports
Smart Display Po
2 * Gigabit
SFP uphill places
4 Modes
Power supply 250 watts

4 Modes:

Standard Mode: Default key location. In this mode, it acts as an unstructured switch; All ports can be connected to each other individually.
Priority Mode: In this mode, ports 15, 16, SFP1, SFP2 operate as the upper ports, Ports 1 through 8 serve as the top priority ports. All ports can be connected to each other individually.
Extend Mode: In this case, data transfer speeds from 9-14 ports will be reduced to 10 Mbps, The maximum transmission distance can reach 250 meters, and all ports can be connected to each other.
VLAN Mode: Switch ports 1 to 14 in this mode include 15, 16, SFP1, SFP2 are different but cannot communicate with each other.
You can enable this mode to reduce broadcast storms and DHCP broadcast isolation.

Gigabit SFP Uplink Slots:

With two 1000Mbps SFP slots, the switch can meet the bandwidth requirements for gigabit wireless LAN and HD digital monitoring. Working with Tenda TEG311SM fiber optic module, the switch supports a maximum transmission distance of up to 20 km.

4 Modes For More Scenarios, One-key To Change Smart And Easy:

Normal mode, advanced mode, VLAN mode and extension mode TEG1118P-16-250W enable the various networks to work, especially for small and medium IP monitoring and WI-FI coverage projects.

6KV Excellent Lightning Protection:

The switch provides a variety of safety and protection, including 6 kV lightning protection, PSE short circuit protection, PoE overload protection, high protection and so on.

230W High Power Output, Diversified Applications:

The IEE802.3AF / AT standard provides 16 PoE 100 / 1000M ports for the entire device, with a maximum output power of 230W and 30W for a single port. Do not be afraid of traffic jams, avoid power outages and reboots. It can provide stable power and data transmission for HD PoE IP cameras, access points, etc. for SMS, hotels, schools, factories, etc.

Integrated With Smart Power Management Chip Keeps A Stable Transmission:

Includes intelligent power management chipsets and a built-in professional control algorithm built into the chip, which can accurately calculate output power. When the receiver power exceeds the estimated power (230W), the low-priority port automatically shuts off to prevent overheating of the device and prolong the life of the device.