How to turn an old router into a Wi-Fi extender

25/05/2022

How to turn an old router into a Wi-Fi extender

Eliminate Wi-Fi dead zones and reuse the old router with DIY wireless extension for a complete home Wi-Fi network.

If your Wi-Fi signal should not be, it is a quick and easy project to learn how to convert an old router to a Wi-Fi extension and solve some problems at the same time.

Unless you live in a small house or apartment, you may not have access to your standard router, even if you have a very good Wi-Fi router. You can do something about it, in addition to complaining about broken Netflix sessions, whether it is causing unstable Wi-Fi or slow connection.

You can change the old router to Wi-Fi extension and allow the signal to reach other parts of your home, solving any coverage issues.

The old router can be easily configured to an extension cable, allowing the device to receive a strong Wi-Fi signal and send new data streams to previously unconnected areas. Even if you spend less, do not expect Wi-Fi miracles. However, it is a great way to fill your home with cheap wireless data.

How to do this trick We have modified the dusty Netgear R7000 802.11ac router Using Netgear Genie, a free network management app for network routers, we have easily converted your old router into a Wi-Fi extension to add Wi-Fi to your guest room.

The general operation of other routers is the same, but not entirely the same. If you do not have one or the other thing (like R6700 or R6900) you can get it online.

If you have an old router, check the instructions to see if the device can be switched on or off and get some instructions. If the router does not support the manufacturer's firmware as a repetitive or repetitive function, there is another way. Check to see if the router can use open source firmware (such as DD-WRT). If so, you may be using the old router as an extension.

Beware of 802.11b & g routers; They have poor performance due to their low bandwidth, which can cause blockages in your network. Do the bill If you have a 100 Mbps connection and your extension is limited to a maximum of 11Mbps or 54Mbps, you are probably wasting most of your bandwidth using the old router. Only 802.11n or AC router will work.

Finally, Asus AiMesh routers can connect to each other to create their own network. There are 17 Asus routers that support AiMesh and you can automatically create mesh topology to fill your home with wireless data. However, you will need to download a new firmware to make it work.