AVAYA IP OFFICE 500 VERSION 2 CONTROL UNIT
The slots are numbered 1 to 4 from left to right. They can be used in any order. However if the capacity for a particular type of card is exceeded, the card in the rightmost slot is disabled. The unit must not be used with uncovered slots.
| Feature | Capacity |
| Maximum Extensions | Up to 384 extensions (depending on the IP Office mode, see Overall Capacity). |
| Conference Parties | 128 as standard but maximum 64 in any individual conference. Silence suppression is applied to conferences with more than 10 parties. |
| Trunks Cards | 4 x IP500 trunk daughter cards, see IP500 Base Cards. Some base cards can also be fitted with trunk cards, see IP500 Trunk Daughter Cards. |
| Voice Compression Channels | Up to 148 channels using IP500 VCM and IP500 Combination cards. |
| Voicemail Channels | Maximum 40 usable for Voicemail Pro/TAPI WAV connection sessions subject to available licenses. For Embedded Voicemail, up to 6 (2 by default, additional channels require licenses). |
| Locales | Supported in all IP Office locales. |
| Minimum Software Level | IP500 V2: IP Office Essential Edition: 6.0 minimum. Subscription: 11.1 minimum. IP Office Basic Edition - PARTNER Mode: 6.0 minimum. IP Office Basic Edition - Norstar Mode: 6.1 minimum. IP Office Basic Edition: 7.0 minimum. Bin file = ip500v2.bin. |
| Power Supply | Internal power supply unit. |
| Mounting | Free-standing, rack mounted (requires IPO IP500 RACK MNTG KIT) or wall mounted (requires IPO IP500 WALL MNTG KIT). |
| Dimensions | Width: 445mm/17.5". Depth: 365mm/14.4". Height: 73mm/2.9"/2U. Clearance: 90mm minimum all sides, 220m at front. |
| Memory | Maximum configuration file size: 2048KB. |
| Name |
| Description | Country | SAP Code |
| IP500 V2 Control Units | IPO IP500 V2 CNTRL Unit | IP Office 500 V2 Control Unit | 700476005 | |
| IPO IP500 V2 CNTRL Unit TAA | " Trade Agreements Act compliant variant. | 700501510 | ||
| Avaya SD Memory Card | IPO IP500 V2 SYS SD CARD AL | IP500 V2 A-Law SD Card | 700479702 | |
| IPO IP500 V2 SYS SD CARD MUL | IP500 V2 U-Law SD Card | 700479710 | ||
| IEC60320 C13 Earthed Power Cord
| IPO - PWR LEAD (EARTHED) EU CEE7/7 | CEE7/7 | Europe | 700289762 |
| IPO - PWR LEAD (EARTHED) UK | BS1363 | United Kingdom | 700289747 | |
| IPO - PWR LEAD (EARTHER) US | NEMA5-15P | America | 700289770 | |
| Mounting Kits | IPO IP500 WALL MNTG KIT V3 | IPO IP500 WALL MNTG KIT V3 | 700503160 | |
| Miscellaneous | IP500 Blanking Plate Kit | IP500 Blanking Plate Kit | 700429194 | |
| Ports | Description | ||
| 3.5mm Stereo jack socket. Used for external music on hold source input. | |||
| •If pressed during a restart of the control unit, the control unit skips booting from the /primary folder on the System SD card. •If pressed for more than 5 seconds when a system is running, the control unit shuts down for 10 minutes. | |||
| CPU | Indicates the status of the control unit.
| ||
| RJ45 socket. Used for direct connection to external expansion modules using the Expansion Interconnect cable supplied with the expansion module. | |||
| 3.5mm Stereo jack socket. Used for switching external relay systems such as door entry controls. The port contains two independent switches controlled by the IP Office. | |||
| AC power input port. | |||
| RJ45 socket. The port is a full-duplex 10/100Mbps auto-sensing, MDI crossover port. With the WAN port forms a managed layer 3 Ethernet switch. | |||
| Used for the Optional SD card. The LED is used in the same way as for the System SD (see below). | |||
| This switch is used to restart the IP Office, optionally erasing the configuration and or the core software in the process. See Reset Button. | |||
| 9-Way D-Type socket. Used for system maintenance. | |||
| Used for the System SD card,. The LED is used as follows.
| |||
| RJ45 socket. The port is a full-duplex 10/100Mbps auto-sensing, MDI crossover port. With the WAN port forms a managed layer 3 Ethernet switch. This port is not supported on systems running in IP Office Basic Edition - PARTNER Mode, IP Office Basic Edition - Norstar Mode or IP Office Basic Editions. | |||
|
| Used for connection of a functional or protective ground. Use of a ground for all systems is recommended and for some locales may be a regulatory requirement. |
No reviews found