APC SRTG 15KXLI

15kVA/15kW Rack/Tower 230V/380V Smart Online UPS

The APC SRTG 15KXLI offers high-density, double-conversion on-line power protection with the added advantage of scalable runtime. It ensures reliable and efficient power backup in critical situations. The UPS comes equipped with a Smart UPS signalling RS-232 cable for effective management and monitoring.

Specifications:

The APC SRTG 15KXLI is a smart online UPS system with a large capacity, suitable for installation in both rack and tower configurations. It has a power rating of 15kVA/15kW and can accept input voltages between 380V and 415V for the main power source, and 220V to 240V for secondary sources. The output voltages provided are 380V to 415V for the main power and 230V for other devices. Its compact size of 7U allows for easy integration into server racks. The APC UPS offers various types of output connectors, such as hard wire 5-wire, hard wire 3-wire, and IDC connectors. It utilizes a dependable lead-acid battery for reliable backup power and includes a Smart UPS signalling RS-232 cable for efficient management and monitoring purposes.

The APC SRTG 15KXLI is a UPS system specifically designed for rack-mounted setups. It boasts an elegant black color and has a small physical size, measuring 30.6 cm in height, 440 mm in width, and 70.0 cm in depth. With a net weight of 142.5 kg, it is suitable for front mounting in the rack, although it is not recommended for two-post mounting. It should be noted that this UPS model does not offer USB compatibility.

The APC SRTG 15KXLI UPS is designed with an automatic frequency detection system that can adapt to network frequencies ranging from 40 Hz to 70 Hz. It offers two input connectors: one hard wire 5-wire (3P + N + E) and one hard wire 3-wire (1P + N + E). The input voltage limits are 160 V to 285 V and 380 V. It has a maximum input current of 66 A and a switching current capacity of 100 A. The APC UPS maintains input harmonic distortion below 5% when operating at full load. It supports both single-phase and three-phase input currents up to 66 A. The load power factor can range from 0.9 leading to 1 lagging.

The APC SRTG 15KXLI UPS delivers a maximum configurable power of 15,000 W (Watt) and 15,000 VA (Volt-Ampere). It operates as a double conversion online UPS, providing a reliable sine wave output waveform. The output frequency is synchronized with the mains at a precise 50/60 Hz, with only a minimal deviation of +/- 0.1 Hz. The UPS is equipped with a 3:1 crest factor and includes a built-in static bypass for enhanced dependability. It achieves high efficiency, reaching 93% in battery mode. With a full load, it offers a runtime of approximately 5 minutes and 30 seconds at 15,000 W, and with a half load, it provides around 14 minutes and 30 seconds at 7,500 W. The UPS can handle output overload for 60 seconds at 125% and 30 seconds at 150%. It holds CB certification and adheres to EN/IEC 62040-2 standards.

In terms of environmental specifications, the UPS can operate within an ambient air temperature range of 0 to 40 °C, while maintaining a relative humidity of 0 to 95% (non-condensing). It is designed to function at altitudes of up to 3,000 m. For storage, it is recommended to be within a temperature range of -15 to 45 °C, with a non-condensing relative humidity of 0 to 95% and an altitude of up to 15,000 m. The UPS generates an acoustic level of 58 dBA and dissipates heat at a rate of 2,866 Btu/h. It possesses an IP20 degree of protection.

The UPS does not come with pre-installed batteries, and the specific number of battery slots is not specified. Recharge time for the batteries is estimated at around 4 hours, and their lifespan is expected to range from 3 to 5 years. The UPS offers battery options such as the SRTG192XLBP2 with varying VAh capacity. It includes a network management card and a multifunction LCD status and control console for convenient monitoring and management. The UPS features alarms for on-battery, low battery, and overload conditions. An emergency power off feature is also available. It provides surge protection, full-time multi-pole noise filtering, and complies with UL 1449 standards for surge response time and clamping.

Regarding packaging, Package 1 has dimensions of 535 mm (height), 590 mm (width), and 790 mm (length), weighing 157.2 kg.