APC Smart-UPS 3000VA USB & Serial 230V
Output |
-Output Power Capacity:2700 Watts / 3000 VA
-Max Configurable Power:2700 Watts / 3000 VA -Nominal Output Voltage230V -Output Voltage Note:Configurable for 220 : 230 or 240 nominal output voltage -Efficiency at Full Load:95.0% -Output Voltage Distortion:Less than 5% at full load
-Output Frequency (sync to mains):47 - 53 Hz for 50 Hz nominal,57 - 63 Hz for 60 Hz nominal -Waveform Type:Sine wave
-Output Connections:
|
||
Input |
-Nominal Input Voltage:230V -Input Frequency:50/60 Hz +/- 3 Hz (auto sensing) -Input Connections: IEC-320-C20 Schuko CEE 7 / EU1-16P British BS1363A -Input voltage range for main operations:160 - 285V -Input voltage adjustable range for mains operation:151 - 302V
|
||
Batteries & Runtime |
-Battery Type:Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
-RBC™ Quantity:1
-Typical recharge time: 3 hour(s)
|
||
Communications & Management |
-Control panel: LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators -Audible Alarm:Alarm when on battery : distinctive low battery alarm : configurable delays -Interface Port(s):DB-9 RS-232,SmartSlot -Emergency Power Off (EPO):Yes
|
||
Surge Protection and Filtering |
-Surge energy rating:365 Joules -Filtering:Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
||
Physical |
-Maximum Height:432.00 mm -Maximum Width:196.00 mm -Maximum Depth:544.00 mm -Net Weight:50.92 KG -Shipping Weight:65.00 KG -Shipping Height:700.00 mm -Shipping Width:380.00 mm
-Shipping Depth:760.00 mm -Color:Black -Units per Pallet:3.00 |
||
Environmental |
-Operating Environment:0 - 40 °C -Operating Relative Humidity:0 - 95% -Operating Elevation:0-3000 meters -Storage Temperature:-15 - 45 °C
-Storage Relative Humidity:0 - 95% -Storage Elevation:0-15000 meters -Audible noise at 1 meter from surface of unit:45.00 dBA -Online Thermal Dissipation:275.00 BTU/hr
|
No posts found
Add new post
.jpg)
(1).jpg)
.jpg)
.jpg)
